For high tensile bowstrings. Silicone based wax. Lubricates & lengthens string life. Once applied, Seal-Tite remains pliable under all weather conditions.

An all natural based string wax and conditioner that greatly reduces string friction and abrasion typically found with cable slides, wheels and rollers. Lubricates and rejuvenates you bowstring. Resists penetration by water to the critical sting fibers, and is scent free.

This odor-free polymeric-based fluid puts more than a little sting in your string! Specifically formulated utilizing the latest innovative polymeric compounds, this product enhances string life and performance. Ideal for both re-curve and compound bow strings. Even as the temperatures drop, it maintains its supple characteristics and is non-brittle. 100% odor-free.

- Odor Free

- Waterproof

- Enhances String COlor

- Lubricates and Reduces String Friction

- Will NOT Freeze

- Long Lasting

Instructions: Apply anywhere to the string 

Mathews ALL-NEW FP-Series Two Piece Arrow Quiver. It is available in two different models, 5 and 7 arrows.

• Harmonic Damper absorbs vibration
• Foam insert accommodates fixed-blade or expandable broadheads
• Machined aluminum construction
• Easily mounts in minutes
• Available in 5 or 7 arrow quivers for right or left- handed shooters!

Mathews revolutionary new ArrowWeb T-series quivers. The next generation quiver for your Mathews SoloCam bow! Loaded with innovative features including the SpiderClaw quick snap attachment system. Extremely lightweight. The ArrowWeb T-series quivers come in three different models, the T3 (three arrow), T5 (five arrow) and T7 (seven arrow).

The ArrowWeb T7 is available in Lost Camo, Realtree AP and Black.

Mathews revolutionary new ArrowWeb T-series quivers. The next generation quiver for your Mathews SoloCam bow! Loaded with innovative features including the SpiderClaw quick snap attachment system. Extremely lightweight. The ArrowWeb T-series quivers come in three different models, the T3 (three arrow), T5 (five arrow) and T7 (seven arrow).

The ArrowWeb T-Series quiver is available in Lost Camo, Realtree AP, Black and Tactical.

The HHA Optimizer Lite Ultra features an exclusive yardage dial that allows for rapid adjustment to the yard between 20 and 60 yards using the included sight scales, to determine with tape to use, sight in at 20 and 60 yards to determine which included sight tape works for your setup. In addition the Optimizer Lite Ultra sight features a tool free micro adjust windage, the sight is CNC machined aluminum, yellow sight ring, lens and light compatable. The HHA Optimizer Lite Ultra Model DS-5019 has a .019 pin with 3 Feet of fiber optic, a 1 5/8" diameter scope housing. Weighs 10 oz. Right Handed.

DS-5019

The Deadenator XS is a high quality bow stabilizer that effectively reduces bow vibration and noise without much increase in bow weight. Featuring TRUGLO's Tru-Touch soft feel, this stabilizer looks and feels great on your bow. Engineered for today's high performance hunting bows, this light weight bow stabilizer is an excellent choice for today's archer.

 The Deadenator XS is a high quality bow stabilizer that effectively reduces bow vibration and noise without much increase in bow weight. Featuring TRUGLO's Tru-Touch soft feel, this stabilizer looks and feels great on your bow. Engineered for today's high performance hunting bows, this light weight bow stabilizer is an excellent choice for today's archer.

- Incredible fiber optic pin brightness

- Over two feet of fiber for each pin

- Five .030" Sidewinder Fiber Optic Pins

- Dual angled tracks for zero gap pin spacing

- Microadjustable windage and elevation modules

- Dovetail Slide Bar Extension

- Yardage Scale

- Non-Freezing Bubble Level

- Enhanced cover and Cobra Glow Sticks

- Cobra Sidewinder LX is a 5 pin sight in Black

An innovative bracket design and unique dual-end fibers sets the Atomic Series Four Pin Sight apart from the competition.  The pivoting elevation bracket reduces the number of sight components to lighten the weight and makes pin adjustment easier.  Dual-end fibers keep the size compact, yet increase the brightness of each pin.  Fibers are also routed through the breaket for increased brightness and follow thin metal blades for support and increased visibility.  The four .029" pins are locked on a single plane for pinpoint aiming and easy gang adjustments.  One-piece, all-metal head protects the pins.  Large circular field of view with a 1.8" inner diameter.  Glow-in-the-dark shooter's ring to help align peep sight.  Adjustable level.  Laser markings for windage and elevation.  Violet LED light included.  Adjustable for left- or right-hand shooters.

Toxonics MetalOptic pins combine the strength of a steel blade and the brilliance of a fiber optic strand. The half moon shaped steel blade protects the fiber optic strand in case of impact ; and, with no exposed loops to snag, fear of stripped threads or breakage of plastic pins is a thing of the past. For a rattle and buzz-free fit, approximately 2 feet of strands are held tightly in the clear retainer, which is mounted into the back of the sight block for the ultimate in light gathering potential.

-Light Kit NOT Included

Toxonics MetalOptic pins combine the strength of a steel blade and the brilliance of a fiber optic strand. The half moon shaped steel blade protects the fiber optic strand in case of impact; and, with no exposed loops to snag, fear of stripped threads or breakage of plastic pins is a thing of the past. For a rattle and buzz-free fit, approximately two feet of strands are held tightly in the clear retainer, which is mounted into the back of the sight block for the ultimate in light gathering potential.

Instructions for Use:

- Use as a dissconnect to remove stabilizer for storage. Loosen stabilizer 1 1/2 turns, then slide brass connector and stabilizer from base and store

- Use as a jackknife knuckle to secure stabilizer against riser. Loosen stabilizer 1 1/2 turns, then swivel stabilizer 90°. Re-tighten to secure.

*This Cobra Double Joint Knuckle does NOT include stabilizer!*

- Adhesive backed

- Replaces holder that is inclued with arrow rest

The backstop stops the forward motion of the bow string, which allows string to stop at natural resting point. Helps in reducing string noise on the shot, hand shock, wrist slap and increase your shot accuracy. Fully adjustable from 4 7/8" to 6 3/4" length.

- Style: Short

- Color: Black

This is X-Factor's 6" stabilizer made from our a-tech rubber. These stabilizers are the next generation in sound and vibration dampening. Also, they are the only fully adjustable stabilizer on the market today. There are no steel rods or supports running through our stabilizers to transfer vibration back to your bow. This gives them the ability to dampen 360˚! They also incorporate our patented Shock Block Technology!

X-factor's 6" weighs 4.8 oz. and is available in Lost Camo, or Realtree APG at Draves Archery.

The new Windjammer features our Next Generation NAVCOM dampening technology at the core: specific-sized NAVCOM particles have been inserted in the tube and then compressed for optimum performance. The Windjammer is designed to accept the optional balancing system (#3076) perfect for offset quiver balancing, side-top-bottom 360 - counter balancing, and more. The Windjammer is available with or without our innoivative balancing system.

-Tunable for Optimal Performance

-Incorporates NAVCOM Technology

-Front or Rear Optional Balance Upgrade

The Apex Bone Collector Pro-Tune Stabilizer with vibration/noise absorbing technology features a tuning fork design that reduces vibration and noise. It also has multiple oscillating weights and edges. Weights can be removed to change stabilizer balance. It also features contraint-layer-damping technology. This model is 4.5" and weights 7.3 ounces. The package includes removable weights, locking screw, tuning fork housing, dampening foam, and a lock washer.

-Features the NEW Ballistix CoPolymer System for added vibration reduction

 
-The strength of aluminum but 25% lighter

-Windage and elevation adjustment

-Reference marks

-Custom rubber boots silence arrow loading

-Designed for use with left and right hand bows

More Compact:

Mounts your quiver tighter to the riser.

More Adjustable:

Mount your quiver higher to eliminate arrows extending below the bottom cam.

Better Balance:

Adjust the mounting angle for better stability.

- Double gripper design with removable upper gripper

 - Compact/lightweight

- Fully adjustable

- Fits both carbon and aluminum arrows

- Magnetic quick-connect

- Technical rubber boot keeps hood quiet and won't dull broadheads

Apex MQX Nano quivers feature magnetic Quick X Connect Technology. Other features include 2-arrow grippers and quick-release mount. For carbon or aluminum arrows. Compact and lightweight.

The Carbon VAPOR is 120 times stronger than steel and it’s lighter than any other quiver ever made. It is in fact as light as it’s name suggests – less than 6 ounces. It gets strength from the hand-crafted carbon fiber weave that is heated and folded over into a single piece. Once hardened, the VAPOR becomes virtually indestructible.

As for silence, the VAPOR is as quiet as a whisper and, due to its design, acts as a huge dampening device on the archers’ bow. Instead of an ABS mold with a rubber insert that is bolted onto a support beam like standard quivers, the VAPOR’s hood is folded over during creation, thereby cutting weight exponentially all while reducing sound. It also gives the VAPOR its unique uni-direction design.

AXT also incorporates a TPR over-molded arch gripper that secures even the smallest diameter arrows. The closed-cell foam insert also accommodates both mechanical and fixed blade broadheads.

- 3K C.B.R. Carbon Body Ridge. A carbon fiber body for superios strength. (Patent Pending)

- 3K C.B.R. carbon hood destroys harmonics and stops the effects of vibration.

- 3K C.B.R. carbon support frame is stronger and lighter and stops the effects of vibration.

- Quad Lock. A four points lock-down system with vertical adjustment.

- V.A.C. Vibration Absorbing Coat. Rubberized clear coat diminishes the effects of vibration.

- 5 arrow hoods with close cell foam insert to securely hold all types of broad heads.

- Arrow tips are secure inside hood insert and will not rattle.

- First position arrow in-line with shooter for minimal movement during pre-shot moments.

- TPR over-mold on ABS hood stops unwanted noise from chamber area.

- Adjustable, one-hand system is secure and quiet.

- Gripper Slot secures all types of arrows from small diameter carbon to larger aluminum.

- Available in 100% 3K Carbon Fiber Material.

The PSE Vertex quiver can be mounted in multiple locations and orientations allowing the archer to change the position and angle of their arrows relative to the bow. The unique extended arrow clip holds 5 arrows at a slight angle, allowing them to be contained within the profile of the bow for protection. The Vertex also positions arrows as close as possible to the riser to improve on center of gravity and make for a steadier shot.

Available: Mossy Oak Break-Up Infinity Camo or Mossy Oak Treestand Camo

PSE two-piece four arrow quiver is equipped with quiet arrow clamps, soft non-abrasive foam that keep broadheads sharp and a quick detach release for easy quiver removal.

Available: Mossy Oak Break-Up Infinity Camo, Mossy Oak Treestand Camo, Skullworks Camo or Black

The PSE Mongoose six arrow quiver is equipped with quiet arrow clamps, soft non-abrasive foam that keep broadheads sharp and quick detach mount for easy quiver removal.

Available: Mossy Oak Break-Up Infinity Camo, Mossy Oak Treestand Camo, Mossy Oak BreakUp Camo, Skullworks or Black

 The Bear Claw mounts to your bow with a rubber latch that promotes quick, silent removal and, in conjunction with the rubber spacing block, disperses shock and vibration when you shoot. This extremely solid mounting system also lets you make easy vertical adjustments for sight and rest clearance. Pre-cut holes in the insert's foam secure mechanical and fixed-blade heads. Holds five arrows. Realtree APG HD

Designed for mechanical or traditional broadheads with shaft sizes from 249ACC to 2413, this versatile five-arrow quiver accommodates all variations of arrows. Soft-Loc rail grippers attach to a machined-aluminum bracket, which is permanently mounted to the bow. Two guide rails separate the hood, and the arrow gripper presses snugly into the rail grippers anywhere along the length of the rails to give you infinite vertical adjustment of the quiver. An extra arrow gripper friction-mounts to the hood end to support mechanical broadheads. The Soft-Loc is reversible for right- or left-hand use and rotates up to 15°. Rubber mounted rail grippers make great vibration dampeners. Holds five arrows.

Magnetic Quick X Connect Technology.

- Double gripper design with removable upper gripper.

- Compact / lightweight.

- Holds up to five arrows.

- Fully adjustable.

- Fits both carbon and aluminum arrows.

Magnetic Quick-Connect Technology enables quiet and easy removal of quiver.

Technical rubber boot keeps hood quiet and won’t dull broadheads.

- 4 Arrow quiver

- 9.7 oz.

- Equipped to hold a large range of shaft diameter.

- Available in Mossy Oak Obsession only!

Kwikee Kwiver is the standard by which all quivers are measured and is the most popular bow quiver in the world. Kwikee Kwiver is made in the U.S.A. and has been manufacturing efficient, effective, top quality and affordable quivers since 1957. All 5 models have an interchangeable bracket system, is designed for carbon or aluminum arrows and standard or mechanical broad heads. Matching your bow is not a problem with Kwikee Kwivers 9 camouflage patterns offered. Products are made of high quality, technologically advanced material and is backed by a lifetime guarantee. Kwikee quivers do everything a hunter expects a quiver to do.

Always hunt safe! When your foam gets worn out, it should be replaced. The Soft Loc Replacement Foam is not your ordinary foam. It is cut from top quality ethafoam and will hold up much longer than generic type quiver foam. New foam insures your broadheads and arrows will be held safely in place.

This latch on the Bear Claw is fast and easy to use. This positive locking latch will allow you to vertically adjust or remove the quiver to suit your needs. Just rotate the lever 90 degrees to lock. This is a very popular item. It is normally mounted to hard bow cases and/or on ATVs for extra storage.

Arrow Gripper Tension Pin Set for arrows smaller than 9/23". (Axis/Beman)

The Tension Pin Set for the Alpine arrow gripper is the answer for holding smaller diameter arrows being produced in today's market. Each pin is molded in an oval shape and designed to increase the tension in the Alpine Soft Loc and Bear Claw Quivers. Simply slip a pin into the outbound hole in the lower quiver gripper. Twist slightly, to increase of decrease tension.

7 pins included.

SKB Corporation has developed the new Hunter Series of Cases for hunting sports, competition enthusiasts, and to better serve the hunting market. The new 2SKB-4117 Hunter Series Parallel Limb Bow Case is the first case developed in the Hunter Series and offers the latest in design technology and maintains SKB’s superior quality while responding to market pressures and price sensitivities.

The 2SKB-4117 Hunter Series Bow Case is designed to accommodate most of the best selling bows on the market with the quiver attached at an affordable price point. Such as the Mathews Reezen, Mathews Monster, Mathews DXT, Mathews Drenalin, Mathews Outback, Bowtech Admiral, Bowtech Captain, Limbsaver DeadZone, Hoyt Alpha Max, Hoyt Power Hawk, Kodiak Outdoors Titan 34 Target, PSE X Force, plus many others.

The new 2SKB-4117 Hunter Series Bow Case features a rigid shaped ABS shell with stylish embossing that actually adds structural support to the lid with an eight point interlocking stacking system. “SKB’s Perfect-Match” valance bending system provides a tight and secure fit to prevent dirt, dust and moisture from the interior of the case with lockable draw-bolt metal latches and a comfortable carrying handle and weighs eleven pounds.

The interior cavity dimensions of the 2SKB-4117 Hunter Series Bow Case are 39” long x 15” wide x 6” high and features plush lined EPS inserts for maximum impact resistance and new state of the art water-jet cut polyethylene foam arrow system that will accommodate up to a dozen arrows.

The art of capturing a hunt on video is becoming very popular. Each year there is an increase of hunters that enjoy doing so. Flex Cam™ has made this art more convenient, easy and affordable. 

The Flex Cam™ eliminates the need for a cameraman, tapes, DVD’s or the cost of an expensive camera. All that is needed is a cel/mobile phone with the capability to record video.

Never before has the hunter been able to capture a hunt on video and send that hunt via Email or MMS Messaging to anyone, anywhere within seconds.

Flex Cam™ will hold all cell phones and most video capable hand held cameras. It will also work with compact video cameras (works great with the Moultrie ReAction Cam!). Flex Cam™ will mount to any bow using the pre-existing stabilizer hole and it can also be used with most shotguns using the firearm adapter.

Flex Cam™ is:
• Easily adjustable with just one hand
• Small and lightweight at less than 7 oz.
• Compatible with all video enabled cell phones

Save your memories and share your adventures with Flex Cam™!

This is a close out price while supplys last!!

This was there best whisker biscut made before Bear Archery bought them out!!

- Vertical micro adjustment with laser engraved match marks

- Versatile deluxe bracket for auto-alignment and quick setup

- Quick shot biscuit for faster loading

- Provides maximum arrow support - Your arrow will stay where it belongs... on the rest!

- FREE felt pads for noise reduction 

Replacement part kits for your QuikTune 360.

- Lightweight and durable

- Available in Mossy Oak® Treestand® camo 

Fits most popular brands:

- PSE Archery

- Browning

- Archery Research

-Extra-long camo cord fits virtually all bows.

-Specially braided to hold its shape.

-CNC-machined adapter performs better than leather slings.

Toxonics MetalOptic pins combine the strength of a steel blade and the brilliance of a fiber optic strand. The half moon shaped steel blade protects the fiber optic strand in case of impact; and, with no exposed loops to snag, fear of stripped threads or breakage of plastic pins is a thing of the past. For a rattle and buzz-free fit, approximately two feet of strands are held tightly in the clear retainer, which is mounted into the back of the sight block for the ultimate in light gathering potential.

Between two points in one plane is created a straight line, the fundamental principle of design for the SoltTrak pins. Without angling pins or using multiple rows of pins, the SoloTrak single row of overlapping snag-proof, rigid steel pins provides a perfectly straight row of aligned aim pins.

The famouse Metal Optic Pin has been re-engineered in a single row to achieve a zero pin gap for arrow speeds beyond 360 feet per second, with the additional size of the finer .010 pin diameter. This new SoloTrak configuration allows for multiple diameter pin sizes and the ability to add or remove any pin or chage fiver color with ease. For example, at close range a .029 is the largest pin and easy to see, for long range a .010 can be added as a last pin to cover less of the target. SoloTrak pins are numbered 1 through 5 with the diameter embossed into the pin for easy identification.

•  
• -Exclusive 20 inches of 0.030" light gathering fiber optic.

• -The brightest pendulum bow sight on the market

• -Patent no. 6601308

Be sure to read all instructions prior to shooting!

The Rellik family of sights are manufactured to the tightest tolerances, the fit, finish, and attention to detail is second to none.

-Every pin has it's own micro adjustment, no tools required

-100% machined aircraft grade aluminum

-ZERO pin gap capabilities

-2nd and 3rd axis adjustments

-Comes standard with two lights, one on top and one on bottom, never go into the woods with a dead light again

-Bead finished internal aperture and red level for anti glare purposes

Primarily designed as an additional component for the LimbSaver Modular Stabilizer System, the Modular Stabilizer Nodes are extremely efficient at reducing additional noise and vibrations. Whether you are a hunter or target shooter, the unsurpassed versatility of LimbSaver Modular Stabilizer Nodes will fit all your needs.

- Length: 1.31"

- Diameter: 1.51"

- Weight: 2.28 oz.

- One Stabilizer... Many options

- Unsurpassed versatility

- Adaptable to for your shooting style

Reduces shock, vibration, and noise! The Mini LimbSaver is the smallest vibration dampener designed for all accessories, including sights, rests, quiver, most cams, etc.

- Height: 0.35"

- Diameter: 0.85"

- Weight: 0.09 oz. each

- Package of 3

This polymeric wax is designed for those preferring a traditional dressing. This formula is flexible, will not freeze or become brittle as other conventional wax based products. Optimized conditioning oils of Kokum, Shea, and Mango prevent premature aging and oxidation of the product. Odor free with applicator included.

- Ideal for recurve and compound bow strings

- Special polymer blend

- Exotic condition oils

- Odor-free formula