Extracts stuck cases from standard sizer dies without damaging the die using a very simple two step removal process. Includes tap, drill bit, allen screw, allen wrench and remover. Will work with any brand of die.
-Unscrew the expander-decapping rod until the decapping pin is free of the primer flash hole in the stuck case.
-Secure the reloading die in a vice and drill the case head with the included drill bit.
-Drill straight through the primer pocket and the primer flash hole.
-Next tap the case head the included 1/4"-20 tap.
-Place the stuck case remover body onto the case head and turn the cap screw with the allen-type wrench until the case is pulled from the die.
-Discard the case and reassemble the die.
You may also be interested in the following product(s)